Design review
Reads geometry, loads and manufacturing rules directly from the active CAD model.
Built for teams designing the physical world
AEROSPACEROBOTICSAUTOMOTIVEINDUSTRIAL
One workspace. Four specialists.
Expert help for every engineering decision.
Each agent owns a specific workflow while sharing the same project context, standards and engineering history.
Engineering calculations
Solves with visible formulas, assumptions, units and verifiable sources.
Component sourcing
Finds and checks real parts against geometry, loading and approved suppliers.
Company knowledge
Answers from previous designs, standards, reports and engineering decisions.
Drop in the assembly.
Axis maps parts, interfaces and editable features without taking the engineer out of the design context.
Risks appear on the model.
Manufacturing conflicts, weak geometry and tolerance issues are pinned to the exact features that caused them.
Review the recommendation.
Every proposed fix includes its impact, assumptions and the design rule behind the decision.
Vector / Calculation agentThe answer keeps
The answer keeps
all of its working.
Vector turns a requirement into a reviewable calculation, with units, assumptions and sources visible at every step.
CANTILEVER BEAM / STATIC LOAD
Maximum bending stress
σ = M × c / I
LOAD / F1,250 N
LENGTH / L420 mm
SECTION40 × 20 mm
MATERIAL6061-T6
VERIFIED RESULT98.4 MPaSafety factor 2.80 / Pass
STRESS ALONG BEAMLIVE SOLVE
FORMULA SOURCE / ROARK 8E §8.2
Forge / Component agentFind the part.
Find the part.
Verify the fit.
Forge searches by engineering intent, then checks each result against the active assembly and supplier constraints.
40 mm sealed bearing, 30 kN minimum dynamic load, available in stainless steelSEARCHING APPROVED CATALOGUES + ACTIVE ASSEMBLY
LIVE COMPONENT CANDIDATES
SKF 6208-2RS1
40 × 80 × 18 MM
CONTACT SEAL
ASSEMBLY MATCH98%
NSK 6208DDU
40 × 80 × 18 MM
STEEL CAGE
ASSEMBLY MATCH94%
FAG 6208-2RSR
40 × 80 × 18 MM
C3 CLEARANCE
ASSEMBLY MATCH89%
SKF 6208-2RS1
40 × 80 × 18 MM
CONTACT SEAL
ASSEMBLY MATCH98%
NSK 6208DDU
40 × 80 × 18 MM
STEEL CAGE
ASSEMBLY MATCH94%
FAG 6208-2RSR
40 × 80 × 18 MM
C3 CLEARANCE
ASSEMBLY MATCH89%
Relay / Knowledge agentYour engineering history
Your engineering history
becomes usable.
Relay connects project files, standards and past decisions, then cites the exact evidence behind every answer.
PROJECT
CONTEXT
CONTEXT
Pump redesign 202548 PROJECT FILES
CNC design rulesSTANDARD / REV 07
Failure analysisREPORT / 16 FILES
Approved materialsPLM / 214 RECORDS
ASK COMPANY KNOWLEDGE
Why did we increase the impeller shaft diameter in the previous pump revision?
The shaft increased from 28 mm to 32 mm after fatigue cracking was observed near the keyway.
Revision C introduced the larger diameter and a 1.5 mm fillet, increasing predicted fatigue life by 61% under the recorded duty cycle.
Revision C introduced the larger diameter and a 1.5 mm fillet, increasing predicted fatigue life by 61% under the recorded duty cycle.
PUMP_REV_C.PDF / P14FAILURE_023.PDF / P6SHAFT_C.STEP
CONNECTED RECORDS1,842
ANSWER CONFIDENCE97%
Built around the engineer
Different roles. One shared engineering context.
Caxora adapts its tools, evidence and outputs to the decision each person is responsible for making.
MECHANICAL ENGINEER
Move from question to checked design.
Review geometry, solve calculations and compare components without breaking the design workflow.
ACTIVE CHECKS12
DESIGN CONFIDENCE96%
Before and after
Less software wrestling. More engineering.
The agent removes repetitive setup and search work while leaving assumptions and approvals with the engineer.
TRADITIONAL WORKFLOWMANUAL / FRAGMENTED
01
Prepare the geometryCLEANUP + EXPORTS
2.5 HRS02
Configure the analysisLOADS + ASSUMPTIONS
3.0 HRS03
Search cataloguesFIT + AVAILABILITY
1.8 HRS04
Build the reportSCREENSHOTS + SOURCES
1.4 HRSWITH CAXORAAGENT-ASSISTED
✓
Connect the active modelGEOMETRY MAPPED
READY✓
Review proposed setupENGINEER APPROVAL
CHECKED✓
Compare verified optionsASSEMBLY-AWARE
RANKED✓
Export the evidenceSOURCES ATTACHED
TRACEABLEEngineering stack
Works where your engineering work already lives.
Connect design files, product records, standards, conversations and approved supplier data.
SWSolidWorksCAD
NXSiemens NXCAD / PLM
AUAutodesk FusionCAD / CAM
INInventorCAD
CACATIACAD
SWSolidWorksCAD
NXSiemens NXCAD / PLM
AUAutodesk FusionCAD / CAM
INInventorCAD
CACATIACAD
PLTeamcenterPLM
SLSlackCOLLABORATION
SPSharePointDOCUMENTS
ONOneDriveFILES
APREST APICUSTOM TOOLS
PLTeamcenterPLM
SLSlackCOLLABORATION
SPSharePointDOCUMENTS
ONOneDriveFILES
APREST APICUSTOM TOOLS
NATIVE CONNECTORS + SECURE FILE INGESTION + API ACCESS
Engineering outcomes
Measure the work that moves faster.
Illustrative pilot targets establish what a team should measure before rolling Caxora across engineering.
PILOT SCORECARD
Track cycle time, review coverage, alternatives explored and sourcing effort against your current baseline.
Potential reduction in repetitive review preparation.
More candidate designs compared within the same cycle.
Potential reduction in manual catalogue and fit checks.
Example workflow
From uploaded assembly to a defensible decision.
A representative pump redesign shows how the agents share context without removing engineering review.
P7
Pump housing redesign
An industrial equipment team needed to reduce mass while resolving recurring shaft fatigue and protecting the existing supplier base.
DESIGN CYCLE5 days → 1.5
01
Assembly connected
Axis maps 48 parts, 126 interfaces and the previous failure region.
02
Load case checked
Vector reconstructs the fatigue calculation with visible assumptions.
03
Alternatives compared
Forge validates bearings and materials against the active housing.
04
Decision documented
Relay produces the recommendation with sources and approval history.
Start at your scale
Useful for one engineer. Powerful across the company.
Begin with a focused workspace or connect governed knowledge across engineering teams.
PERSONAL WORKSPACE
Your engineering copilot.
Bring a model, calculation or sourcing question and keep every result organised by project.
Private projectsINCLUDED
Four specialist agentsINCLUDED
Exportable reportsINCLUDED
Robotic arm reviewAXIS / 3 CHECKS COMPLETE
Beam calculationVECTOR / VERIFIED
Bearing searchFORGE / 3 MATCHES
COMPANY PLATFORM
Shared intelligence with control.
Connect standards, project history and approved sources while managing roles, access and review policies.
Company knowledge graphCONNECTED
Roles, SSO and audit trailENABLED
Private deployment optionsAVAILABLE
Design engineering18 ACTIVE PROJECTS
Manufacturing7 REVIEW QUEUES
R&D knowledge1,842 CONNECTED RECORDS
Engineer in control
Automation proposes. Engineers approve.
Critical assumptions, boundary conditions and final recommendations pass through explicit human checkpoints.
01Agent proposesSETUP + SOURCES
02Engineer checksASSUMPTIONS
03Analysis runsTRACEABLE
04Decision approvedAUDIT READY
Enterprise security
Your engineering knowledge remains yours.
Caxora is designed for sensitive product development, with secure access controls and strict separation of customer data.
Customer data used for model trainingNEVER
Encryption at rest and in transitENABLED
Organisation roles and SSOSUPPORTED
Audit-ready activity recordsAVAILABLE
✓
PRIVATE ENGINEERING WORKSPACE / ACTIVEPricing
Start focused. Expand when the workflow proves itself.
Pricing is structured around individual use, connected teams and enterprise deployment requirements.
Engineer
For engineers using Caxora across personal design projects.
$39 / MONTH
- Four specialist agents
- Private project workspace
- CAD and document uploads
- Exportable reports
Team
For engineering groups sharing projects, sources and review workflows.
$99 / USER / MONTH
- Everything in Engineer
- Shared project knowledge
- Approval workflows
- Admin and usage controls
Company
For governed engineering knowledge and custom deployment requirements.
Custom
- Everything in Team
- SSO, roles and audit logs
- PLM and custom integrations
- Private deployment options
FAQ
Questions engineering teams ask first.
Technical evaluation should start with supported workflows, verification and data handling.
The product concept supports common neutral formats such as STEP, IGES and STL, with native CAD and PLM connectors planned according to customer workflow priorities.
No. Caxora prepares, checks and documents work while engineers remain responsible for assumptions, boundary conditions, validation and final approval.
Calculation outputs expose formulas, units, assumptions and source references so an engineer can independently review the result.
The proposed enterprise policy is that customer engineering data remains isolated and is never used to train shared public models.
Team and enterprise deployments can support approved document stores, PLM records, supplier libraries and custom systems through controlled connectors and APIs.
Build with confidence
Book a technical demo ↗